View and Download Saeco Odea Giro Plus instruction manual online. User Manual Saeco Odea Giro Full Free Books Author: giaoan.caodangnghehcm.edu.vn Subject: User Manual Saeco Odea Giro Full Keywords: User Manual Saeco Odea Giro Full, pdf, free, download, book, ebook, books, ebooks Created Date: 8/6/2021 6:27:32 PM. For more detailed instructions on descaling your machine, please refer to the user manual. Start with the machine turned off. Fill the water tank with the descaling solution.(1 packet Saeco descaling solution to 4 cups water.) 3. Turn on the machine. Run approximately 2 cups of solution through the steam/hot water wand.
Saeco Odea Giro Plus Repair Service Tips
Saeco Odea Giro Plus coffee machine offers you great tasting espresso from your favorite coffee beans with the simple push of a button.
This machine is intended for household use.
Max coffee per day: 20 cups
Manual & Documentation
User Manual - PDF file★ Do you need spare parts? ★
We have a huge range of replacement parts for your Saeco Odea Giro Plus Coffee Maker.
Visit our online store here >
Electricity related issues
Cable and cable fuse
It is really rare for the fuse to go, but can happen in case of a shorted component.Check the fuse in the plug. Make sure the plug is properly connected into the connector slot.
Electric panel
The problem might be casued by a faulty electric board, which is unfortunately rarely repairable.Thermostat(s)
Some thermostats need to be reactivated after a possible overheating of the machine, while they can also go in case of an extreme overheating issue.Temperature sensor
Although rarely, but the temperature sensor can cause this fault as well.Electric board
Ocasionally faulty triacs and varistors can cause such a symptom.Electric components
Almost any electric component can cause burnt smell.Electric board
Burnt smell mainly arises from faulty electric boards.Exclamation mark (red) flashing fast
This sign means that there is no water flow in the system and is mainly caused by a blockage in the water system or the brew unit, or a misplaced water tank.Fill the water tank and let water through the steam wand till you get a continuous flow.
Exclamation mark (red) flashing slow
This sign indicates that one of the removable components is not in place, or the service door is open, or the steam knob is not in neutral position.Make sure the brew unit is correctly in place.
Check the dump box , it might not be correctly in place.
Replace the coffee container lid.
Make sure the service door is properly closed.
Turn the steam knob into neutral position.
Exclamation mark (red) steady on
If the sign appears in the middle of the grinding process, and the ground coffee gets thrown into the dump box without the coffee being brewed, then the coffee container is either empty or the grinder blades are blocked by wet or greasy coffee. Otherwise it can indicate a full drip tray or an empty water tank.Fill the water tank.
Empty the drip tray.
Fill the coffee beans container.
Clean and readjust grinder.
Heating element (red) and dregdrawer signs (red) flashing alternately
This sign can indicate three things and You can determine the most likely one by observing when the light comes on. It might be on a few seconds after turning the machine on, indicating that there is no change in the boiler temperature, meaning that the machine is not heating. However, if the light comes on later as You press the coffee button, then the grinder is most likely blocked. In case it comes on after the grinding process and it won't start the coffee brewing process, then the brew unit is probably blocked.Clean and lubricate brew unit.
Clean and readjust grinder.
Dregdrawer sign (red) steady on
The machine counts the number of coffees made since the last time the signal came up and the dump box was emptied and after about 13 coffees it will give the signal to empty it again, even if You have emptied it in between the two signals. You also need to remember to empty the drip tray along with the dump box as well, because the tray has no separate sensor.Empty the dump box.
Heating element sign (red) flashing
The machine measures the amount of water that ran through the system since the last time the signal was resetted, and depending on the water hardness level settings it will give the signal again after the pre-programmed amount of water ran through the system again. You can reset the sign by pressing and holding the steam/water droplet button for about 8 seconds (till the sign goes out).Descale the machine.
Water related issues
Dirty water
This problem is mainly caused by ground coffee piling up in the drainage vent, blocking the path of the excess water let out by the overpressure or the boiler valve.Clean and lubricate brew unit.
Clean the drainage vent behind the brew unit thoroughly.
Clear water
This is a clear sign of a leaking water system. We strongly advise to stop operating the machine as soon as You come across with this fault.Sensor issue
In case filling the water tank doesn't help, then the water level sensor might be faulty or might have fallen off of the inner wall of the water container compartment.Fill the water tank.
Saeco Odea Go Plus User Manual Part
Airlock
This symptom is mostly accompanied by the quickly flashing exclamation mark, and means that the filling of the water system is required.Fill the water tank and let water through the steam wand till you get a continuous flow.
Water working, but no coffee
In cases, where You can't get coffee out of the machine even though You get water through the steam wand, the most common cause is a blocked, dirty brew unit.Clean and lubricate brew unit.
Frother blocked
You need to keep in mind, that all frothers need to be cleaned straight away after use, otherwise milk residue will build up and block the steam wand and frother.Clean the frother attachment and steam wand.
Brew unit related issues
Brew unit is clogged up
The brew unit is the heart of the machine and it is recommended to be cleaned once a week under running water.Clean and lubricate brew unit.
Brew unit stuck
This mainly happens when the user tries to force the brew unit out without reseting it to neutral position.Gears are not aligned
This fault mainly occurs when the user removes the dump box and/or the brew unit before the machine could reset itself to neutral position.Put the brew unit aside and everything else back to their places, close the service door and turn the machine off and then on, wait till the machine stands completely still and you should be able to replace the brew unit.
Clicking / cracking sound
Mostly a sound generated by the brew unit and it is a sign of the lack of lubrication.Clean and lubricate brew unit.
Gearbox damaged
In extreme cases, the lack of lubrication can even lead to overexerting and damaging the gearbox.Brew unit clogged up
The fault might simply originate from the lack of maintenance, caused by piled up ground coffee blocking the operation of the brew unit.Clean and lubricate brew unit.
Ground coffee related issues
Pucks are falling apart
The ground coffee can't stay together as a puck if it's too coarse or the quantity of ground coffee is too low. The quantity can only be influenced by the smoothness of the brew unit movement.Readjust the grinder to grind finer.
Clean and lubricate brew unit.
Pucks are muddy
If the brew unit is not cleaned and lubricated, thus moves sluggishly, then the CPU will think that it's struggling to compress the coffee, so it will decrease the ground coffee quantity.Readjust the grinder to grind coarser.
Clean and lubricate brew unit.
Ocasionally
The grinder might be clogged up or the beans You use might be a bit too oily.Put the brew unit aside and everything else back to their places, close the service door and turn the machine off and then on, wait till the machine stands completely still and you should be able to replace the brew unit.
Try different beans.
Frequently
The problem is most likely with the beans You use. They might be too oily or too big for the grinder to properly work with.Try different beans.
Clean water
Clean water mostly gets in the dump box in larger quantities if the brew unit is not properly cleaned.Clean and lubricate brew unit.
Coffee
In case coffee ends up in the dump box, that means that either the brew unit, or the connection between the brew unit and the machine is damaged.Small amount
All automatic machines spill some ground coffee around the brew unit. You need to clean and lubricate the brew unit on a regular basis to keep the machine running and clean.Clean and lubricate brew unit.
Large amount
This maily occurs because of the brew unit as symptom of the lack of lubrication, resulting in a desorted ground coffee quantity data.Clean and lubricate brew unit.
Clean and readjust grinder.
Grinder operating, but not grinding the beans
In the vast majority of the cases this symptom is caused by either some kind of liquid that was poured into the grinder or greasy coffee beans. Both result in ground coffee stuck to the blades making them unable to grind the coffee.Clean and readjust grinder.
Grinder does not operate
The grinder is either blocked by some foreign object or the motor might be worn out or faulty.Clean and readjust grinder.
Saeco Odea Giro Plus Manuale Italiano
In case You can't or don't want to resolve the problem with the tips above, then the machine needs the attention of a professional.End product related issues
Saeco Odea Giro Plus User Manual
Brew unit clogged up
A possible problem is that the shower disc is blocked by coffee residue.Clean and lubricate brew unit.
The ground coffee is too fine
The grinder fineness settings might be too fine and water can't pass through the ground coffee, or the ground coffee is so fine, that it can block the shower disc.Readjust the grinder to grind coarser.
Set the ground coffee quantity lower.
The ground coffee is too coarse
The blades might be damaged or, as impossible as it may sound, worn out. Yes. These ceramic blades can wear out too, but only after a much longer period than the normal, metal ones.Readjust the grinder to grind finer.
Wrong beans
The beans might be stale or the percentage of arabica beans in the blend might be too high. For these machines we reccomend at least 40% robusta percentage.Try different beans.
In case You can't or don't want to resolve the problem with the tips above, then the machine needs the attention of a professional.Coffee temperature
Descale the machine.
Pre-heat the cup before brewing coffee.
Too high
The temperature might be too high in case the system has a larger amount of limescale built up inside.Descale the machine.
Lukewarm
Oddly enough in most cases this issue is not related to the machine at all. It is rather related to the cold mug or cup the user brews the coffee into.Pre-heat the cup before brewing coffee.
Cold
This is a rare issue, mainly caused by a faulty temperature sensor.
Saeco Odea Giro Plus Repair Service Tips
Saeco Odea Giro Plus coffee machine offers you great tasting espresso from your favorite coffee beans with the simple push of a button.
This machine is intended for household use.
Max coffee per day: 20 cups
Manual & Documentation
User Manual - PDF file★ Do you need spare parts? ★
We have a huge range of replacement parts for your Saeco Odea Giro Plus Coffee Maker.
Visit our online store here >
Electricity related issues
Cable and cable fuse
It is really rare for the fuse to go, but can happen in case of a shorted component.Check the fuse in the plug. Make sure the plug is properly connected into the connector slot.
Electric panel
The problem might be casued by a faulty electric board, which is unfortunately rarely repairable.Thermostat(s)
Some thermostats need to be reactivated after a possible overheating of the machine, while they can also go in case of an extreme overheating issue.Temperature sensor
Although rarely, but the temperature sensor can cause this fault as well.Electric board
Ocasionally faulty triacs and varistors can cause such a symptom.Electric components
Almost any electric component can cause burnt smell.Electric board
Burnt smell mainly arises from faulty electric boards.Exclamation mark (red) flashing fast
This sign means that there is no water flow in the system and is mainly caused by a blockage in the water system or the brew unit, or a misplaced water tank.Fill the water tank and let water through the steam wand till you get a continuous flow.
Exclamation mark (red) flashing slow
This sign indicates that one of the removable components is not in place, or the service door is open, or the steam knob is not in neutral position.Make sure the brew unit is correctly in place.
Check the dump box , it might not be correctly in place.
Replace the coffee container lid.
Make sure the service door is properly closed.
Turn the steam knob into neutral position.
Exclamation mark (red) steady on
If the sign appears in the middle of the grinding process, and the ground coffee gets thrown into the dump box without the coffee being brewed, then the coffee container is either empty or the grinder blades are blocked by wet or greasy coffee. Otherwise it can indicate a full drip tray or an empty water tank.Fill the water tank.
Empty the drip tray.
Fill the coffee beans container.
Clean and readjust grinder.
Heating element (red) and dregdrawer signs (red) flashing alternately
This sign can indicate three things and You can determine the most likely one by observing when the light comes on. It might be on a few seconds after turning the machine on, indicating that there is no change in the boiler temperature, meaning that the machine is not heating. However, if the light comes on later as You press the coffee button, then the grinder is most likely blocked. In case it comes on after the grinding process and it won't start the coffee brewing process, then the brew unit is probably blocked.Clean and lubricate brew unit.
Clean and readjust grinder.
Dregdrawer sign (red) steady on
The machine counts the number of coffees made since the last time the signal came up and the dump box was emptied and after about 13 coffees it will give the signal to empty it again, even if You have emptied it in between the two signals. You also need to remember to empty the drip tray along with the dump box as well, because the tray has no separate sensor.Empty the dump box.
Heating element sign (red) flashing
The machine measures the amount of water that ran through the system since the last time the signal was resetted, and depending on the water hardness level settings it will give the signal again after the pre-programmed amount of water ran through the system again. You can reset the sign by pressing and holding the steam/water droplet button for about 8 seconds (till the sign goes out).Descale the machine.
Water related issues
Dirty water
This problem is mainly caused by ground coffee piling up in the drainage vent, blocking the path of the excess water let out by the overpressure or the boiler valve.Clean and lubricate brew unit.
Clean the drainage vent behind the brew unit thoroughly.
Clear water
This is a clear sign of a leaking water system. We strongly advise to stop operating the machine as soon as You come across with this fault.Sensor issue
In case filling the water tank doesn't help, then the water level sensor might be faulty or might have fallen off of the inner wall of the water container compartment.Fill the water tank.
Saeco Odea Go Plus User Manual Part
Airlock
This symptom is mostly accompanied by the quickly flashing exclamation mark, and means that the filling of the water system is required.Fill the water tank and let water through the steam wand till you get a continuous flow.
Water working, but no coffee
In cases, where You can't get coffee out of the machine even though You get water through the steam wand, the most common cause is a blocked, dirty brew unit.Clean and lubricate brew unit.
Frother blocked
You need to keep in mind, that all frothers need to be cleaned straight away after use, otherwise milk residue will build up and block the steam wand and frother.Clean the frother attachment and steam wand.
Brew unit related issues
Brew unit is clogged up
The brew unit is the heart of the machine and it is recommended to be cleaned once a week under running water.Clean and lubricate brew unit.
Brew unit stuck
This mainly happens when the user tries to force the brew unit out without reseting it to neutral position.Gears are not aligned
This fault mainly occurs when the user removes the dump box and/or the brew unit before the machine could reset itself to neutral position.Put the brew unit aside and everything else back to their places, close the service door and turn the machine off and then on, wait till the machine stands completely still and you should be able to replace the brew unit.
Clicking / cracking sound
Mostly a sound generated by the brew unit and it is a sign of the lack of lubrication.Clean and lubricate brew unit.
Gearbox damaged
In extreme cases, the lack of lubrication can even lead to overexerting and damaging the gearbox.Brew unit clogged up
The fault might simply originate from the lack of maintenance, caused by piled up ground coffee blocking the operation of the brew unit.Clean and lubricate brew unit.
Ground coffee related issues
Pucks are falling apart
The ground coffee can't stay together as a puck if it's too coarse or the quantity of ground coffee is too low. The quantity can only be influenced by the smoothness of the brew unit movement.Readjust the grinder to grind finer.
Clean and lubricate brew unit.
Pucks are muddy
If the brew unit is not cleaned and lubricated, thus moves sluggishly, then the CPU will think that it's struggling to compress the coffee, so it will decrease the ground coffee quantity.Readjust the grinder to grind coarser.
Clean and lubricate brew unit.
Ocasionally
The grinder might be clogged up or the beans You use might be a bit too oily.Put the brew unit aside and everything else back to their places, close the service door and turn the machine off and then on, wait till the machine stands completely still and you should be able to replace the brew unit.
Try different beans.
Frequently
The problem is most likely with the beans You use. They might be too oily or too big for the grinder to properly work with.Try different beans.
Clean water
Clean water mostly gets in the dump box in larger quantities if the brew unit is not properly cleaned.Clean and lubricate brew unit.
Coffee
In case coffee ends up in the dump box, that means that either the brew unit, or the connection between the brew unit and the machine is damaged.Small amount
All automatic machines spill some ground coffee around the brew unit. You need to clean and lubricate the brew unit on a regular basis to keep the machine running and clean.Clean and lubricate brew unit.
Large amount
This maily occurs because of the brew unit as symptom of the lack of lubrication, resulting in a desorted ground coffee quantity data.Clean and lubricate brew unit.
Clean and readjust grinder.
Grinder operating, but not grinding the beans
In the vast majority of the cases this symptom is caused by either some kind of liquid that was poured into the grinder or greasy coffee beans. Both result in ground coffee stuck to the blades making them unable to grind the coffee.Clean and readjust grinder.
Grinder does not operate
The grinder is either blocked by some foreign object or the motor might be worn out or faulty.Clean and readjust grinder.
Saeco Odea Giro Plus Manuale Italiano
In case You can't or don't want to resolve the problem with the tips above, then the machine needs the attention of a professional.End product related issues
Saeco Odea Giro Plus User Manual
Brew unit clogged up
A possible problem is that the shower disc is blocked by coffee residue.Clean and lubricate brew unit.
The ground coffee is too fine
The grinder fineness settings might be too fine and water can't pass through the ground coffee, or the ground coffee is so fine, that it can block the shower disc.Readjust the grinder to grind coarser.
Set the ground coffee quantity lower.
The ground coffee is too coarse
The blades might be damaged or, as impossible as it may sound, worn out. Yes. These ceramic blades can wear out too, but only after a much longer period than the normal, metal ones.Readjust the grinder to grind finer.
Wrong beans
The beans might be stale or the percentage of arabica beans in the blend might be too high. For these machines we reccomend at least 40% robusta percentage.Try different beans.
Too high
The temperature might be too high in case the system has a larger amount of limescale built up inside.Descale the machine.
Lukewarm
Oddly enough in most cases this issue is not related to the machine at all. It is rather related to the cold mug or cup the user brews the coffee into.Pre-heat the cup before brewing coffee.
Cold
This is a rare issue, mainly caused by a faulty temperature sensor.Weak
The strength of the coffee is influenced by the coffee blend, the ground coffee fineness and quantity, the temperature and the pressure. A weak coffee might be the result of stale beans or too high arabica percentage, coarse ground coffee, low ground coffee quantity, low temperature, or a combination of these.Readjust the grinder to grind finer.
Try different beans.
Strong or sour
The strength of the coffee is influenced by the coffee blend, the ground coffee fineness and quantity, the temperature and the pressure. A strong coffee might be the result of high robusta percentage, fine ground coffee, high ground coffee quantity, high temperature, or a combination of these.Readjust the grinder to grind coarser.
Set the ground coffee quantity lower.
Try different beans.
There is no crema on top
In the world of automatic machines the theme crema will be somewhat simplified because of the low number of factors the user can influence and the low precision value of these adjustments. Basically there are three adjustable factors that have the most influence on the crema in a correctly operating automatic machine. These three factors are the coffee beans, the grinding fineness and the ground coffee quantity. The higher robusta percentage, the finer the ground coffee and the higher the coffee quantity is, the thicker the crema will turn out to be.Readjust the grinder to grind finer.
Set the ground coffee quantity higher.
Try different beans.
Milk warms up, but is not froted
If You have steam pressure, but the milk is not frothed, then the problem can only be with the frother device. The most common problem is that the frother is not perfectly clean. You need to make sure to keep the small hole on the side of the frother attachment clear.Clean the frother attachment and steam wand.
Descale the machine.
Saeco Talea Giro Plus Manual
In case You can't or don't want to resolve the problem with the tips above, then the machine needs the attention of a professional.